Fingerprint Vertical Bar Necklace - Gold plated

Fingerprint Vertical Bar Necklace

From €149,00

Material Gold plated

Necklace

42 cm 45 cm Popular 45 cm Double beaded +€10,00 50 cm 50 cm Double beaded +€10,00 50 cm Figaro +€10,00 60 cm +€10,00 70 cm +€10,00

Subtotal €149,00

Personalized jewellery

Free delivery above €150*

Packed with love

Share

Description

Wear your loved ones close to you with the Fingerprint Vertical Bar Necklace from MAMALOVES. Engraving one, two or three fingerprints. If desired, add a back engraving to create your own unique piece of jewellery.

Order our handy ink strip here to take a perfect fingerprint.

Specifications

Vertical bar dimensions: 39.5 mm x 8.1 mm.
Please note! We engrave fingerprints from 12 months. Before then, the fingertips are still too small, too soft and without relief, so they cannot leave a good print.

Shipping & FAQ

How do I measure my wrist?

1. Cut a piece of wire or thin strip of paper about 25 cm long.
2. Wrap the wire around your wrist, leaving about 1 cm extra space.
3. Cut the piece of wire and place it next to a ruler to accurately measure the length. For the ideal size, we recommend adding at least 1 cm extra.

If in doubt, you can always contact customer service at klantenservice@mamaloves.com

OPTION 1: How to make a fingerprint with MAMALOVES ink strip

1. Remove the foil from the ink strip.
2. Place your finger in the center of the ink strip and press your finger firmly into it.
3. Remove the finger from the ink strip and gently place it on the white part of the provided card.
4. Take a sharp picture (or scan) of the fingerprints.
5. Use our upload tool to send the fingerprints.
6. Violà, you're done :)

OPTION 2: How to make a fingerprint with pencil and paper

1. Grab the supplies: paper, pencil & tape.
2. With a pencil, make a black area on paper.
3. Rub your finger over the black area.
4. Now press your finger on a piece of tape.
5. Stick the piece of tape on a white piece of paper.

If in any doubt, you can always contact customer service at klantenservice@mamaloves.com

How to make a paw print?

1. Grab the supplies: water-based acrylic paint, a wet towel and a piece of paper.

2. Clean the paw and apply the acrylic paint only to the pads of the paw. Press the paw against the paper and repeat the stamp until it becomes a clear print.

3. Make a sharp photo (or scan) of the paw print.Of course, you can also replace the acrylic paint with our ink strip.

If in doubt, you can always contact customer service at klantenservice@mamaloves.com.

How to make a handwritten text?

1. Take a picture or scan of the text you want on a charm. This can be a text you wrote yourself or one from someone close to you.

2. Limit the length of the text. This is necessary for the text to fit on the charm.

3. It is important that the text is readable. So preferably please deliver texts written with pen or pencil.

4. Use the upload tool to share the photo with us.

If in doubt, you can always contact customer service at klantenservice@mamaloves.com.

How to make a hand and footprint?

1. Grab the supplies: children's paint, baby wipes, paper and a brush.
2. Using the brush, apply the paint to the hand or foot.
3. Stamp the hand or foot on the paper.
4. Take a sharp photo (or scan) of the hand or foot print.

If in doubt, you can always contact customer service at klantenservice@mamaloves.com

How to make a hand and footprint?

1. Grab the supplies: children's paint, baby wipes, paper and a brush.
2. Using the brush, apply the paint to the hand or foot.
3. Stamp the hand or foot on the paper.
4. Take a sharp photo (or scan) of the hand or foot print.

If in doubt, you can always contact customer service at klantenservice@mamaloves.com.

How do you create an illustration?

1. Only the contour lines are engraved
2. Shadows are not included in the design
3. Facial details of people are not engraved, however the details of animals will be engraved
4. Background will not be engraved.

In case of any doubt, you can always contact customer service at customerservice@mamaloves.com.

How to create an echo illustration?

1. For best results, we would like to receive a photo of the ultrasound between 12 and 19 weeks.

2. Only the contour lines will be engraved.

3. Shadows will not be included in the design

4. Background will not be engraved.

If in any doubt, you can always contact customer service at klantenservice@mamaloves.com.